Signal the battery level steps to the user, by blinking the output during the output mode.
More...
|
|
void | signal_output_on () |
| | Call when the output mode is entered.
|
| |
|
void | loop () |
| | Call on each main loop of the output mode, before the user loop.
|
| |
|
void | set_enabled (const bool isEnabled) |
| | Enable or disable the blinks. Saved with the system parameters.
|
| |
|
bool | is_enabled () |
| | Return true if the blinks are enabled.
|
| |
| constexpr uint8_t | get_blink_count (const uint16_t level) |
| | Return the number of blinks of a battery level.
|
| |
|
|
static constexpr uint32_t | levelFilterWindow_ms = 1000 |
| | A level must be held for this time to be displayed, the voltage drops on high current use.
|
| |
|
static constexpr uint32_t | minOutputUseTime_ms = 10000 |
| | A level passed before this output use time is never displayed.
|
| |
|
static constexpr uint32_t | blinkOffTime_ms = 50 |
| | Time the output is off during a blink.
|
| |
|
static constexpr uint32_t | blinkPeriod_ms = 150 |
| | Time between the start of two successive blinks.
|
| |
Signal the battery level steps to the user, by blinking the output during the output mode.
◆ get_blink_count()
| constexpr uint8_t lampda::logic::battery_blink::get_blink_count |
( |
const uint16_t |
level | ) |
|
|
constexpr |
Return the number of blinks of a battery level.
- Parameters
-
| [in] | level | The battery level, in percent * 100 |
- Returns
- 1 under 75%, 2 under 50%, 3 under 25%, and 0 otherwise